Column 3D Chart Specification Sheet
SWF: FCF_Column3D.swf

A 3D Column chart looks as under:

And, the XML data for this chart can be listed as under:

<graph bgcolor='e1f5ff' caption='Decline in Net Interest Margins of Asian Banks (1995-2001)' subCaption='(in Percentage %)' yaxismaxvalue="2" yaxisminvalue='-2.5' yaxisname='Points' xaxisname='Country' hovercapbg='FFFFDD' hovercapborder='000000' numdivlines='4' numberSuffix='%25'>
   <set name='Taiwan' value='-0.33' color='F6BD0F'/>
   <set name='Malaysia' value='-0.27' color='FF6600'/>
   <set name='Hong Kong' value='0.40' color='8BBA00' alpha='70'/>
   <set name='Philippines' value='0.6' color='F984A1'/>
   <set name='Singapore' value='-0.8' color='A66EDD' alpha='70'/>
   <set name='Thailand' value='-2.2' color='B2FF66'/>
   <set name='India' value='1.2' color='AFD8F8'/>
<trendlines>
   <line startvalue='0.8' displayValue='Good' color='FF0000' thickness='1' isTrendZone='0'/>
   <line startvalue='-0.4' displayValue='Bad' color='009999' thickness='1' isTrendZone='0'/>
</trendlines>
</graph>

 

<graph> Attributes

The <graph> element for this chart can have the following properties:

Background Properties

  • bgColor="HexColorCode" : This attribute sets the background color for the chart. You can set any hex color code as the value of this attribute. Remember that you DO NOT need to assign a "#" at the beginning of the hex color code. In fact, whenever you need to provide any hex color code in FusionCharts XML data document, you do not have to assign the # at the beginning.
  • bgAlpha="NumericalValue(0-100)" : This attribute helps you set the alpha (transparency) of the graph. This is particularly useful when you need to load the chart in one of your Flash movies or when you want to set a background image (.swf) for the chart.
  • bgSWF="Path of SWF File" : This attribute helps you load an external .swf file as a background for the chart.

Canvas Properties

  • canvasBgColor="HexColorCode" : This attribute helps you set the background color of the canvas. The background of the canvas is the one behind the columns.
  • canvasBaseColor="HexColorCode" : This attribute helps you set the color of the canvas base. The canvas abse is the on which the base of the columns are placed..
  • canvasBaseDepth="Numerical Value" : This attribute helps you set the height (3D Depth) of the canvas base.
  • canvasBaseDepth="Numerical Value" : This attribute helps you set the height (3D Depth) of the canvas base.
  • canvasBgDepth="Numerical Value" : This attribute helps you set the 3D Depth of the canvas background.
  • showCanvasBg="1/0" : This attribute helps us set whether we need to show the canvas background.
  • showCanvasBase="1/0" : This attribute helps us set whether we need to show the canvas base.

Chart and Axis Titles

  • caption="String" : This attribute determines the caption of the chart that would appear at the top of the chart.
  • subCaption="String" : Sub-caption of the chart
  • xAxisName= "String" : x-Axis text title (if the chart supports axis)
  • yAxisName= "String" : y-Axis text title (if the chart supports axis)

Chart Numerical Limits

  • yAxisMinValue="value": This attribute determines the lower limit of y-axis.
  • yAxisMaxValue="value" : This attribute determines the upper limit of y-axis.
    If you don't specify any of the above values, it is automatically calculated by FusionCharts based on the data provided by you.

Generic Properties

  • shownames="1/0" : This attribute can have either of the two possible values: 1,0. It sets the configuration whether the x-axis values (for the data sets) will be displayed or not. By default, this attribute assumes the value 1, which means that the x-axis names will be displayed.
  • showValues="1/0" : This attribute can have either of the two possible values: 1,0. It sets the configuration whether the data numerical values will be displayed along with the columns, bars, lines and the pies. By default, this attribute assumes the value 1, which means that the values will be displayed.
  • showLimits="1/0" : Option whether to show/hide the chart limit textboxes.
  • rotateNames="1/0" : Configuration that sets whether the category name text boxes would be rotated or not.
  • animation="1/0" : This attribute sets whether the animation is to be played or whether the entire chart would be rendered at one go.

Font Properties

  • baseFont="FontName" : This attribute sets the base font family of the chart font which lies on the canvas i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font name provided here.
  • baseFontSize="FontSize" : This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font size provided here.
  • baseFontColor="HexColorCode" : This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie on the canvas will be displayed using the font color provided here.
  • outCnvBaseFont = "FontName" : This attribute sets the base font family of the chart font which lies outside the canvas i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font name provided here.
  • outCnvBaseFontSze="FontSize" : This attribute sets the base font size of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font size provided here.
  • outCnvBaseFontColor="HexColorCode": This attribute sets the base font color of the chart i.e., all the values and the names in the chart which lie outside the canvas will be displayed using the font color provided here.

Number Formatting Option

  • numberPrefix="$" : Using this attribute, you could add prefix to all the numbers visible on the graph. For example, to represent all dollars figure on the chart, you could specify this attribute to ' $' to show like $40000, $50000.
  • numberSuffix="p.a" : Using this attribute, you could add prefix to all the numbers visible on the graph. For example, to represent all figure quantified as per annum on the chart, you could specify this attribute to ' /a' to show like 40000/a, 50000/a.
    To use special characters for numberPrefix or numberSuffix, you'll need to URL Encode them. That is, suppose you wish to have numberSuffix as % (like 30%), you'll need to specify it as under:
    numberSuffix='%25'
  • formatNumber="1/0" : This configuration determines whether the numbers displayed on the chart will be formatted using commas, e.g., 40,000 if formatNumber='1' and 40000 if formatNumber='0 '
  • formatNumberScale="1/0" : Configuration whether to add K (thousands) and M (millions) to a number after truncating and rounding it - e.g., if formatNumberScale is set to 1, 10434 would become 1.04K (with decimalPrecision set to 2 places). Same with numbers in millions - a M will added at the end.
  • decimalSeparator="." : This option helps you specify the character to be used as the decimal separator in a number.
  • thousandSeparator="," : This option helps you specify the character to be used as the thousands separator in a number.
  • decimalPrecision="2" : Number of decimal places to which all numbers on the chart would be rounded to.
  • divLineDecimalPrecision="2": Number of decimal places to which all divisional line (horizontal) values on the chart would be rounded to.
  • limitsDecimalPrecision="2" : Number of decimal places to which upper and lower limit values on the chart would be rounded to.

Zero Plane

The zero plane is a 3D plane that signifies the 0 position on the chart. If there are no negative numbers on the chart, you won't see a visible zero plane.
  • zeroPlaneShowBorder="1/0" : Whether the border of a 3D zero plane would be plotted or not.
  • zeroPlaneBorderColor="Hex Code" : If the border is to be plotted, this attribute sets the border color for the plane.
  • zeroPlaneColor="Hex Code" : The intended color for the zero plane.
  • zeroPlaneAlpha="Numerical Value 0-100" : The intended transparency for the zero plane.

Divisional Lines (Horizontal)

Divisional Lines are horizontal or vertical lines running through the canvas. Each divisional line signfies a smaller unit of the entire axis thus aiding the users in interpreting the chart.

  • numdivlines="NumericalValue" : This attribute sets the number of divisional lines to be drawn.
  • divlinecolor="HexColorCode" : The color of grid divisional line.
  • divLineThickness="NumericalValue" : Thickness (in pixels) of the grid divisional line.
  • divLineAlpha="NumericalValue0-100" : Alpha (transparency) of the grid divisional line.
  • showDivLineValue="1/0" : Option to show/hide the textual value of the divisional line.

Hover Caption Properties

The hover caption is the tool tip which shows up when the user moves his mouse over a particular data item (column, line, pie, bar etc.).

  • showhovercap="1/0" : Option whether to show/hide hover caption box.
  • hoverCapBgColor="HexColorCode" : Background color of the hover caption box.
  • hoverCapBorderColor="HexColorCode" : Border color of the hover caption box.
  • hoverCapSepChar="Char" : The character specified as the value of this attribute separates the name and value displayed in the hover caption box.

Chart Margins

Chart Margins refers to the empty space left on the top, bottom, left and right of the chart. That means, FusionCharts would leave that much amount of empty space on the chart, before it starts plotting.

  • chartLeftMargin="Numerical Value (in pixels)" : Space to be left unplotted on the left side of the chart.
  • chartRightMargin="Numerical Value (in pixels)" : Empty space to be left on the right side of the chart
  • chartTopMargin="Numerical Value (in pixels)" : Empty space to be left on the top of the chart.
  • chartBottomMargin="Numerical Value (in pixels)" : Empty space to be left at the bottom of the chart.
 

<set> element

We now move on to the <set> element which is a child element of the <graph> element and determines a set of data which would appear on the graph.

A <set> element looks as under:
<set name="Jan" value="54" color="3300FF" hoverText="January" link="ShowDetails.asp%3FMonth=Jan" alpha="80" showName="1"/>

Now let's study the the possible attributes of the <set> element:

  • name="string"
    Example: <set name='Jan' ...>
    This attribute determines the name by which the set of data would be represented in the chart. In the above example, the value of this attribute is "Jan" and therefore, this set of data would be represented on the chart with the name "Jan".
  • value="NumericalValue"
    Example: <set name='Jan' value='12345' ...>
    This attribute determines the numerical value for the set of data according to which the chart would be built for the concerned set of data.
  • color="HexCode"
    Example: <set name='Jan' value='12345' color='636363' ...>
    This attribute determines the color for the concerned set of data in which it would appear in the graph.
  • hoverText="String value"
    Example: <set name='Jan' value='12345' color='636363' hoverText='January'...>
    Sometimes, you might just want to show the abbreviated names on the x-axis (to avoid cluttering or to make the chart look more legible). However, you still have the option of showing the full name as tool tip using this attribute. Like, in our example, we're showing the abbreviated form "Jan" on our x-axis, but the full word "January" is shown as the tool tip.
  • link="URL"
    Example: <set … link='ShowDetails.asp%3FMonth=Jan' ...>
    This attribute defines the hotspots in your graph. The hotspots are links over the data sets. Please note that you'll need to URL Encode all the special characters (like ? and &) present in the link.All the server side scripting languages provide a generic function to URL Encode any string - like in ASP and ASP.NET, we've Server.URLEncode(strURL) and so on.

    To open a link in a new window, just put n- in front of the link e.g., link="n-ShowDetails.asp%3FMonth=Jan".
  • alpha="Numerical Value 0-100"
    Example: <set ... alpha='100' ...>
    This attribute determines the transparency of a data set. The range for this attribute is 0 to 100. 0 means complete transparency (the data set won’t be shown on the graph) and 100 means opaque. This option is useful when you want to highlight a particular set of data.
  • showName="1"
    Example : <set ... showName="1" ...>
    This attribute can either the value of 0 or 1. A value of 1 indicates that the name of this data set will be displayed in the graph whereas 0 indicates it won't be displayed. This attribute is particular useful when you want to show/hide names of alternate data items or say every x (th) data item.

At the end of the <set> element, you would find a "/" which signals that it has no more child element

 

<trendLines>

Using the <trendLines> element (and child elements), you can define trend lines on the charts. Trend lines are the horizontal lines spanning the chart canvas that aid in interpretation of data with respect to some previous pre-determined figure. For each trend line on the chart, you need to define a <line> element as under:
<line startValue='89.5' endValue='98' color='FF0000' displayvalue='Roll. Avg.' thickness='2' alpha='100' isTrendZone='0' showOnTop='1'/>

The <line> element can have the following attributes:

  • startValue='NumericalValue': The starting y-axis value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the startValue would 102.
  • endValue='NumericalValue': The ending y-axis value for the trendline. Say, if you want to plot a slanted trendline from value 102 to 109, the endValue would 109. If you do not specify a value for endValue, it would automatically assume the same value as startValue.
  • color='HexCode' : Color of the trend line and its associated text.
  • displayValue='StringValue' : If you want to display a string caption for the trend line by its side, you can use this attribute. Example: displayValue='Last Month High'. When you don't supply this attribute, it automatically takes the value of startValue.
  • thickness='NumericalValue' : Thickness of the trend line
  • isTrendZone='1/0': Whether the trend would display a line, or a zone (filled colored rectangle).
  • showOnTop='1/0': Whether the trend line/zone would be displayed over other elements of the chart.
  • alpha='NumericalValue0-100': Alpha (transparency) of the trend line
At the end of the data file, you would find a </graph> element, which signals the end of the data file for the graph.