Current File : //usr/share/snmp/mibs/SNMP-USM-DH-OBJECTS-MIB.txt
SNMP-USM-DH-OBJECTS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
-- OBJECT-IDENTITY,
experimental, Integer32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
usmUserEntry
FROM SNMP-USER-BASED-SM-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
snmpUsmDHObjectsMIB MODULE-IDENTITY
LAST-UPDATED "200003060000Z" -- 6 March 2000, Midnight
ORGANIZATION "Excite@Home"
CONTACT-INFO "Author: Mike StJohns
Postal: Excite@Home
450 Broadway
Redwood City, CA 94063
Email: stjohns@corp.home.net
Phone: +1-650-556-5368"
DESCRIPTION
"The management information definitions for providing forward
secrecy for key changes for the usmUserTable, and for providing a
method for 'kickstarting' access to the agent via a Diffie-Helman
key agreement."
REVISION "200003060000Z"
DESCRIPTION
"Initial version published as RFC 2786."
::= { experimental 101 } -- IANA DHKEY-CHANGE 101
-- Administrative assignments
usmDHKeyObjects OBJECT IDENTIFIER ::= { snmpUsmDHObjectsMIB 1 }
usmDHKeyConformance OBJECT IDENTIFIER ::= { snmpUsmDHObjectsMIB 2 }
-- Textual conventions
DHKeyChange ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Upon initialization, or upon creation of a row containing an
object of this type, and after any successful SET of this value, a
GET of this value returns 'y' where y = g^xa MOD p, and where g is
the base from usmDHParameters, p is the prime from
usmDHParameters, and xa is a new random integer selected by the
agent in the interval 2^(l-1) <= xa < 2^l < p-1. 'l' is the
optional privateValueLength from usmDHParameters in bits. If 'l'
is omitted, then xa (and xr below) is selected in the interval 0
<= xa < p-1. y is expressed as an OCTET STRING 'PV' of length 'k'
which satisfies
k
y = SUM 2^(8(k-i)) PV'i
i=1
where PV1,...,PVk are the octets of PV from first to last, and
where PV1 <> 0.
A successful SET consists of the value 'y' expressed as an OCTET
STRING as above concatenated with the value 'z'(expressed as an
OCTET STRING in the same manner as y) where z = g^xr MOD p, where
g, p and l are as above, and where xr is a new random integer
selected by the manager in the interval 2^(l-1) <= xr < 2^l <
p-1. A SET to an object of this type will fail with the error
wrongValue if the current 'y' does not match the 'y' portion of
the value of the varbind for the object. (E.g. GET yout, SET
concat(yin, z), yout <> yin).
Note that the private values xa and xr are never transmitted from
manager to device or vice versa, only the values y and z.
Obviously, these values must be retained until a successful SET on
the associated object.
The shared secret 'sk' is calculated at the agent as sk = z^xa MOD
p, and at the manager as sk = y^xr MOD p.
Each object definition of this type MUST describe how to map from
the shared secret 'sk' to the operational key value used by the
protocols and operations related to the object. In general, if n
bits of key are required, the author suggests using the n
right-most bits of the shared secret as the operational key value."
REFERENCE
"-- Diffie-Hellman Key-Agreement Standard, PKCS #3;
RSA Laboratories, November 1993"
SYNTAX OCTET STRING
-- Diffie Hellman public values
usmDHPublicObjects OBJECT IDENTIFIER ::= { usmDHKeyObjects 1 }
usmDHParameters OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The public Diffie-Hellman parameters for doing a Diffie-Hellman
key agreement for this device. This is encoded as an ASN.1
DHParameter per PKCS #3, section 9. E.g.
DHParameter ::= SEQUENCE {
prime INTEGER, -- p
base INTEGER, -- g
privateValueLength INTEGER OPTIONAL }
Implementors are encouraged to use either the values from
Oakley Group 1 or the values of from Oakley Group 2 as specified
in RFC-2409, The Internet Key Exchange, Section 6.1, 6.2 as the
default for this object. Other values may be used, but the
security properties of those values MUST be well understood and
MUST meet the requirements of PKCS #3 for the selection of
Diffie-Hellman primes.
In addition, any time usmDHParameters changes, all values of
type DHKeyChange will change and new random numbers MUST be
generated by the agent for each DHKeyChange object."
REFERENCE
"-- Diffie-Hellman Key-Agreement Standard, PKCS #3,
RSA Laboratories, November 1993
-- The Internet Key Exchange, RFC 2409, November 1998,
Sec 6.1, 6.2"
::= { usmDHPublicObjects 1 }
usmDHUserKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF UsmDHUserKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments and extends the usmUserTable and provides
4 objects which exactly mirror the objects in that table with the
textual convention of 'KeyChange'. This extension allows key
changes to be done in a manner where the knowledge of the current
secret plus knowledge of the key change data exchanges (e.g. via
wiretapping) will not reveal the new key."
::= { usmDHPublicObjects 2 }
usmDHUserKeyEntry OBJECT-TYPE
SYNTAX UsmDHUserKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row of DHKeyChange objects which augment or replace the
functionality of the KeyChange objects in the base table row."
AUGMENTS { usmUserEntry }
::= {usmDHUserKeyTable 1 }
UsmDHUserKeyEntry ::= SEQUENCE {
usmDHUserAuthKeyChange DHKeyChange,
usmDHUserOwnAuthKeyChange DHKeyChange,
usmDHUserPrivKeyChange DHKeyChange,
usmDHUserOwnPrivKeyChange DHKeyChange
}
usmDHUserAuthKeyChange OBJECT-TYPE
SYNTAX DHKeyChange
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object used to change any given user's Authentication Key
using a Diffie-Hellman key exchange.
The right-most n bits of the shared secret 'sk', where 'n' is the
number of bits required for the protocol defined by
usmUserAuthProtocol, are installed as the operational
authentication key for this row after a successful SET."
::= { usmDHUserKeyEntry 1 }
usmDHUserOwnAuthKeyChange OBJECT-TYPE
SYNTAX DHKeyChange
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object used to change the agents own Authentication Key
using a Diffie-Hellman key exchange.
The right-most n bits of the shared secret 'sk', where 'n' is the
number of bits required for the protocol defined by
usmUserAuthProtocol, are installed as the operational
authentication key for this row after a successful SET."
::= { usmDHUserKeyEntry 2 }
usmDHUserPrivKeyChange OBJECT-TYPE
SYNTAX DHKeyChange
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object used to change any given user's Privacy Key using
a Diffie-Hellman key exchange.
The right-most n bits of the shared secret 'sk', where 'n' is the
number of bits required for the protocol defined by
usmUserPrivProtocol, are installed as the operational privacy key
for this row after a successful SET."
::= { usmDHUserKeyEntry 3 }
usmDHUserOwnPrivKeyChange OBJECT-TYPE
SYNTAX DHKeyChange
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object used to change the agent's own Privacy Key using a
Diffie-Hellman key exchange.
The right-most n bits of the shared secret 'sk', where 'n' is the
number of bits required for the protocol defined by
usmUserPrivProtocol, are installed as the operational privacy key
for this row after a successful SET."
::= { usmDHUserKeyEntry 4 }
usmDHKickstartGroup OBJECT IDENTIFIER ::= { usmDHKeyObjects 2 }
usmDHKickstartTable OBJECT-TYPE
SYNTAX SEQUENCE OF UsmDHKickstartEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of mappings between zero or more Diffie-Helman key
agreement values and entries in the usmUserTable. Entries in this
table are created by providing the associated device with a
Diffie-Helman public value and a usmUserName/usmUserSecurityName
pair during initialization. How these values are provided is
outside the scope of this MIB, but could be provided manually, or
through a configuration file. Valid public value/name pairs
result in the creation of a row in this table as well as the
creation of an associated row (with keys derived as indicated) in
the usmUserTable. The actual access the related usmSecurityName
has is dependent on the entries in the VACM tables. In general,
an implementor will specify one or more standard security names
and will provide entries in the VACM tables granting various
levels of access to those names. The actual content of the VACM
table is beyond the scope of this MIB.
Note: This table is expected to be readable without authentication
using the usmUserSecurityName 'dhKickstart'. See the conformance
statements for details."
::= { usmDHKickstartGroup 1 }
usmDHKickstartEntry OBJECT-TYPE
SYNTAX UsmDHKickstartEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the usmDHKickstartTable. The agent SHOULD either
delete this entry or mark it as inactive upon a successful SET of
any of the KeyChange-typed objects in the usmUserEntry or upon a
successful SET of any of the DHKeyChange-typed objects in the
usmDhKeyChangeEntry where the related usmSecurityName (e.g. row of
usmUserTable or row of ushDhKeyChangeTable) equals this entry's
usmDhKickstartSecurityName. In otherwords, once you've changed
one or more of the keys for a row in usmUserTable with a
particular security name, the row in this table with that same
security name is no longer useful or meaningful."
INDEX { usmDHKickstartIndex }
::= {usmDHKickstartTable 1 }
UsmDHKickstartEntry ::= SEQUENCE {
usmDHKickstartIndex Integer32,
usmDHKickstartMyPublic OCTET STRING,
usmDHKickstartMgrPublic OCTET STRING,
usmDHKickstartSecurityName SnmpAdminString
}
usmDHKickstartIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index value for this row."
::= { usmDHKickstartEntry 1 }
usmDHKickstartMyPublic OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The agent's Diffie-Hellman public value for this row. At
initialization, the agent generates a random number and derives
its public value from that number. This public value is published
here. This public value 'y' equals g^r MOD p where g is the from
the set of Diffie-Hellman parameters, p is the prime from those
parameters, and r is a random integer selected by the agent in the
interval 2^(l-1) <= r < p-1 < 2^l. If l is unspecified, then r is
a random integer selected in the interval 0 <= r < p-1
The public value is expressed as an OCTET STRING 'PV' of length
'k' which satisfies
k
y = SUM 2^(8(k-i)) PV'i
i = 1
where PV1,...,PVk are the octets of PV from first to last, and
where PV1 != 0.
The following DH parameters (Oakley group #2, RFC 2409, sec 6.1,
6.2) are used for this object:
g = 2
p = FFFFFFFF FFFFFFFF C90FDAA2 2168C234 C4C6628B 80DC1CD1
29024E08 8A67CC74 020BBEA6 3B139B22 514A0879 8E3404DD
EF9519B3 CD3A431B 302B0A6D F25F1437 4FE1356D 6D51C245
E485B576 625E7EC6 F44C42E9 A637ED6B 0BFF5CB6 F406B7ED
EE386BFB 5A899FA5 AE9F2411 7C4B1FE6 49286651 ECE65381
FFFFFFFF FFFFFFFF
l=1024
"
REFERENCE
"-- Diffie-Hellman Key-Agreement Standard, PKCS#3v1.4;
RSA Laboratories, November 1993
-- The Internet Key Exchange, RFC2409;
Harkins, D., Carrel, D.; November 1998"
::= { usmDHKickstartEntry 2 }
usmDHKickstartMgrPublic OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The manager's Diffie-Hellman public value for this row. Note
that this value is not set via the SNMP agent, but may be set via
some out of band method, such as the device's configuration file.
The manager calculates this value in the same manner and using the
same parameter set as the agent does. E.g. it selects a random
number 'r', calculates y = g^r mod p and provides 'y' as the
public number expressed as an OCTET STRING. See
usmDHKickstartMyPublic for details.
When this object is set with a valid value during initialization,
a row is created in the usmUserTable with the following values:
usmUserEngineID localEngineID
usmUserName [value of usmDHKickstartSecurityName]
usmUserSecurityName [value of usmDHKickstartSecurityName]
usmUserCloneFrom ZeroDotZero
usmUserAuthProtocol usmHMACMD5AuthProtocol
usmUserAuthKeyChange -- derived from set value
usmUserOwnAuthKeyChange -- derived from set value
usmUserPrivProtocol usmDESPrivProtocol
usmUserPrivKeyChange -- derived from set value
usmUserOwnPrivKeyChange -- derived from set value
usmUserPublic ''
usmUserStorageType permanent
usmUserStatus active
A shared secret 'sk' is calculated at the agent as sk =
mgrPublic^r mod p where r is the agents random number and p is the
DH prime from the common parameters. The underlying privacy key
for this row is derived from sk by applying the key derivation
function PBKDF2 defined in PKCS#5v2.0 with a salt of 0xd1310ba6,
and iterationCount of 500, a keyLength of 16 (for
usmDESPrivProtocol), and a prf (pseudo random function) of
'id-hmacWithSHA1'. The underlying authentication key for this row
is derived from sk by applying the key derivation function PBKDF2
with a salt of 0x98dfb5ac , an interation count of 500, a
keyLength of 16 (for usmHMAC5AuthProtocol), and a prf of
'id-hmacWithSHA1'. Note: The salts are the first two words in the
ks0 [key schedule 0] of the BLOWFISH cipher from 'Applied
Cryptography' by Bruce Schnier - they could be any relatively
random string of bits.
The manager can use its knowledge of its own random number and the
agent's public value to kickstart its access to the agent in a
secure manner. Note that the security of this approach is
directly related to the strength of the authorization security of
the out of band provisioning of the managers public value
(e.g. the configuration file), but is not dependent at all on the
strength of the confidentiality of the out of band provisioning
data."
REFERENCE
"-- Password-Based Cryptography Standard, PKCS#5v2.0;
RSA Laboratories, March 1999
-- Applied Cryptography, 2nd Ed.; B. Schneier,
Counterpane Systems; John Wiley & Sons, 1996"
::= { usmDHKickstartEntry 3 }
usmDHKickstartSecurityName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The usmUserName and usmUserSecurityName in the usmUserTable
associated with this row. This is provided in the same manner and
at the same time as the usmDHKickstartMgrPublic value -
e.g. possibly manually, or via the device's configuration file."
::= { usmDHKickstartEntry 4 }
-- Conformance Information
usmDHKeyMIBCompliances OBJECT IDENTIFIER ::= { usmDHKeyConformance 1 }
usmDHKeyMIBGroups OBJECT IDENTIFIER ::= { usmDHKeyConformance 2 }
-- Compliance statements
usmDHKeyMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for this module."
MODULE
GROUP usmDHKeyMIBBasicGroup
DESCRIPTION
"This group MAY be implemented by any agent which
implements the usmUserTable and which wishes to provide the
ability to change user and agent authentication and privacy
keys via Diffie-Hellman key exchanges."
GROUP usmDHKeyParamGroup
DESCRIPTION
"This group MUST be implemented by any agent which
implements a MIB containing the DHKeyChange Textual
Convention defined in this module."
GROUP usmDHKeyKickstartGroup
DESCRIPTION
"This group MAY be implemented by any agent which
implements the usmUserTable and which wishes the ability to
populate the USM table based on out-of-band provided DH
ignition values.
Any agent implementing this group is expected to provide
preinstalled entries in the vacm tables as follows:
In the usmUserTable: This entry allows access to the
system and dhKickstart groups
usmUserEngineID localEngineID
usmUserName 'dhKickstart'
usmUserSecurityName 'dhKickstart'
usmUserCloneFrom ZeroDotZero
usmUserAuthProtocol none
usmUserAuthKeyChange ''
usmUserOwnAuthKeyChange ''
usmUserPrivProtocol none
usmUserPrivKeyChange ''
usmUserOwnPrivKeyChange ''
usmUserPublic ''
usmUserStorageType permanent
usmUserStatus active
In the vacmSecurityToGroupTable: This maps the initial
user into the accessible objects.
vacmSecurityModel 3 (USM)
vacmSecurityName 'dhKickstart'
vacmGroupName 'dhKickstart'
vacmSecurityToGroupStorageType permanent
vacmSecurityToGroupStatus active
In the vacmAccessTable: Group name to view name translation.
vacmGroupName 'dhKickstart'
vacmAccessContextPrefix ''
vacmAccessSecurityModel 3 (USM)
vacmAccessSecurityLevel noAuthNoPriv
vacmAccessContextMatch exact
vacmAccessReadViewName 'dhKickRestricted'
vacmAccessWriteViewName ''
vacmAccessNotifyViewName 'dhKickRestricted'
vacmAccessStorageType permanent
vacmAccessStatus active
In the vacmViewTreeFamilyTable: Two entries to allow the
initial entry to access the system and kickstart groups.
vacmViewTreeFamilyViewName 'dhKickRestricted'
vacmViewTreeFamilySubtree 1.3.6.1.2.1.1 (system)
vacmViewTreeFamilyMask ''
vacmViewTreeFamilyType 1
vacmViewTreeFamilyStorageType permanent
vacmViewTreeFamilyStatus active
vacmViewTreeFamilyViewName 'dhKickRestricted'
vacmViewTreeFamilySubtree (usmDHKickstartTable OID)
vacmViewTreeFamilyMask ''
vacmViewTreeFamilyType 1
vacmViewTreeFamilyStorageType permanent
vacmViewTreeFamilyStatus active
"
OBJECT usmDHParameters
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to implement this object as read-only for
any device."
::= { usmDHKeyMIBCompliances 1 }
-- Units of Compliance
usmDHKeyMIBBasicGroup OBJECT-GROUP
OBJECTS {
usmDHUserAuthKeyChange,
usmDHUserOwnAuthKeyChange,
usmDHUserPrivKeyChange,
usmDHUserOwnPrivKeyChange
}
STATUS current
DESCRIPTION
""
::= { usmDHKeyMIBGroups 1 }
usmDHKeyParamGroup OBJECT-GROUP
OBJECTS {
usmDHParameters
}
STATUS current
DESCRIPTION
"The mandatory object for all MIBs which use the DHKeyChange
textual convention."
::= { usmDHKeyMIBGroups 2 }
usmDHKeyKickstartGroup OBJECT-GROUP
OBJECTS {
usmDHKickstartMyPublic,
usmDHKickstartMgrPublic,
usmDHKickstartSecurityName
}
STATUS current
DESCRIPTION
"The objects used for kickstarting one or more SNMPv3 USM
associations via a configuration file or other out of band,
non-confidential access."
::= { usmDHKeyMIBGroups 3 }
END
Mr. DellatioNx196 GaLers xh3LL Backd00r 1.0, Coded By Mr. DellatioNx196 - Bogor BlackHat