Current File : //usr/share/snmp/mibs/SNMP-COMMUNITY-MIB.txt
SNMP-COMMUNITY-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress,
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
snmpModules
FROM SNMPv2-SMI
RowStatus,
StorageType
FROM SNMPv2-TC
SnmpAdminString,
SnmpEngineID
FROM SNMP-FRAMEWORK-MIB
SnmpTagValue,
snmpTargetAddrEntry
FROM SNMP-TARGET-MIB
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF;
snmpCommunityMIB MODULE-IDENTITY
LAST-UPDATED "200003060000Z" -- 6 Mar 2000, midnight
ORGANIZATION "SNMPv3 Working Group"
CONTACT-INFO "WG-email: snmpv3@lists.tislabs.com
Subscribe: majordomo@lists.tislabs.com
In msg body: subscribe snmpv3
Chair: Russ Mundy
TIS Labs at Network Associates
Postal: 3060 Washington Rd
Glenwood MD 21738
USA
Email: mundy@tislabs.com
Phone: +1-301-854-6889
Co-editor: Rob Frye
CoSine Communications
Postal: 1200 Bridge Parkway
Redwood City, CA 94065
USA
E-mail: rfrye@cosinecom.com
Phone: +1 703 725 1130
Co-editor: David B. Levi
Nortel Networks
Postal: 3505 Kesterwood Drive
Knoxville, TN 37918
E-mail: dlevi@nortelnetworks.com
Phone: +1 423 686 0432
Co-editor: Shawn A. Routhier
Integrated Systems Inc.
Postal: 333 North Ave 4th Floor
Wakefield, MA 01880
E-mail: sar@epilogue.com
Phone: +1 781 245 0804
Co-editor: Bert Wijnen
Lucent Technologies
Postal: Schagen 33
3461 GL Linschoten
Netherlands
Email: bwijnen@lucent.com
Phone: +31-348-407-775
"
DESCRIPTION
"This MIB module defines objects to help support coexistence
between SNMPv1, SNMPv2c, and SNMPv3."
REVISION "200003060000Z" -- 6 Mar 2000
DESCRIPTION "This version published as RFC 2576."
REVISION "199905130000Z" -- 13 May 1999
DESCRIPTION "The Initial Revision"
::= { snmpModules 18 }
-- Administrative assignments ****************************************
snmpCommunityMIBObjects OBJECT IDENTIFIER ::= { snmpCommunityMIB 1 }
snmpCommunityMIBConformance OBJECT IDENTIFIER ::= { snmpCommunityMIB 2 }
--
-- The snmpCommunityTable contains a database of community strings.
-- This table provides mappings between community strings, and the
-- parameters required for View-based Access Control.
--
snmpCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of community strings configured in the SNMP
engine's Local Configuration Datastore (LCD)."
::= { snmpCommunityMIBObjects 1 }
snmpCommunityEntry OBJECT-TYPE
SYNTAX SnmpCommunityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular community string."
INDEX { IMPLIED snmpCommunityIndex }
::= { snmpCommunityTable 1 }
SnmpCommunityEntry ::= SEQUENCE {
snmpCommunityIndex SnmpAdminString,
snmpCommunityName OCTET STRING,
snmpCommunitySecurityName SnmpAdminString,
snmpCommunityContextEngineID SnmpEngineID,
snmpCommunityContextName SnmpAdminString,
snmpCommunityTransportTag SnmpTagValue,
snmpCommunityStorageType StorageType,
snmpCommunityStatus RowStatus
}
snmpCommunityIndex OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The unique index value of a row in this table."
::= { snmpCommunityEntry 1 }
snmpCommunityName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The community string for which a row in this table
represents a configuration."
::= { snmpCommunityEntry 2 }
snmpCommunitySecurityName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A human readable string representing the corresponding
value of snmpCommunityName in a Security Model
independent format."
::= { snmpCommunityEntry 3 }
snmpCommunityContextEngineID OBJECT-TYPE
SYNTAX SnmpEngineID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The contextEngineID indicating the location of the
context in which management information is accessed
when using the community string specified by the
corresponding instance of snmpCommunityName.
The default value is the snmpEngineID of the entity in
which this object is instantiated."
::= { snmpCommunityEntry 4 }
snmpCommunityContextName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The context in which management information is accessed
when using the community string specified by the corresponding
instance of snmpCommunityName."
DEFVAL { ''H } -- the empty string
::= { snmpCommunityEntry 5 }
snmpCommunityTransportTag OBJECT-TYPE
SYNTAX SnmpTagValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies a set of transport endpoints
from which a command responder application will accept
management requests. If a management request containing
this community is received on a transport endpoint other
than the transport endpoints identified by this object,
the request is deemed unauthentic.
The transports identified by this object are specified
in the snmpTargetAddrTable. Entries in that table
whose snmpTargetAddrTagList contains this tag value
are identified.
If the value of this object has zero-length, transport
endpoints are not checked when authenticating messages
containing this community string."
DEFVAL { ''H } -- the empty string
::= { snmpCommunityEntry 6 }
snmpCommunityStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row in the
snmpCommunityTable. Conceptual rows having the value
'permanent' need not allow write-access to any
columnar object in the row."
::= { snmpCommunityEntry 7 }
snmpCommunityStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row in the snmpCommunityTable.
An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default values, or through
Set operations. The snmpCommunityName and
snmpCommunitySecurityName objects must be explicitly set.
There is no restriction on setting columns in this table
when the value of snmpCommunityStatus is active(1)."
::= { snmpCommunityEntry 8 }
--
-- The snmpTargetAddrExtTable
--
snmpTargetAddrExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnmpTargetAddrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of mask and mms values associated with the
snmpTargetAddrTable.
The snmpTargetAddrExtTable augments the
snmpTargetAddrTable with a transport address mask value
and a maximum message size value. The transport address
mask allows entries in the snmpTargetAddrTable to define
a set of addresses instead of just a single address.
The maximum message size value allows the maximum
message size of another SNMP entity to be configured for
use in SNMPv1 (and SNMPv2c) transactions, where the
message format does not specify a maximum message size."
::= { snmpCommunityMIBObjects 2 }
snmpTargetAddrExtEntry OBJECT-TYPE
SYNTAX SnmpTargetAddrExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular mask and mms value."
AUGMENTS { snmpTargetAddrEntry }
::= { snmpTargetAddrExtTable 1 }
SnmpTargetAddrExtEntry ::= SEQUENCE {
snmpTargetAddrTMask OCTET STRING,
snmpTargetAddrMMS Integer32
}
snmpTargetAddrTMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mask value associated with an entry in the
snmpTargetAddrTable. The value of this object must
have the same length as the corresponding instance of
snmpTargetAddrTAddress, or must have length 0. An
attempt to set it to any other value will result in
an inconsistentValue error.
The value of this object allows an entry in the
snmpTargetAddrTable to specify multiple addresses.
The mask value is used to select which bits of
a transport address must match bits of the corresponding
instance of snmpTargetAddrTAddress, in order for the
transport address to match a particular entry in the
snmpTargetAddrTable. Bits which are 1 in the mask
value indicate bits in the transport address which
must match bits in the snmpTargetAddrTAddress value.
Bits which are 0 in the mask indicate bits in the
transport address which need not match. If the
length of the mask is 0, the mask should be treated
as if all its bits were 1 and its length were equal
to the length of the corresponding value of
snmpTargetAddrTable.
This object may not be modified while the value of the
corresponding instance of snmpTargetAddrRowStatus is
active(1). An attempt to set this object in this case
will result in an inconsistentValue error."
DEFVAL { ''H }
::= { snmpTargetAddrExtEntry 1 }
snmpTargetAddrMMS OBJECT-TYPE
SYNTAX Integer32 (0|484..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum message size value associated with an entry
in the snmpTargetAddrTable."
DEFVAL { 484 }
::= { snmpTargetAddrExtEntry 2 }
--
-- The snmpTrapAddress and snmpTrapCommunity objects are included
-- in notifications that are forwarded by a proxy, which were
-- originally received as SNMPv1 Trap messages.
--
snmpTrapAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the agent-addr field of a Trap PDU which
is forwarded by a proxy forwarder application using
an SNMP version other than SNMPv1. The value of this
object SHOULD contain the value of the agent-addr field
from the original Trap PDU as generated by an SNMPv1
agent."
::= { snmpCommunityMIBObjects 3 }
snmpTrapCommunity OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the community string field of an SNMPv1
message containing a Trap PDU which is forwarded by a
a proxy forwarder application using an SNMP version
other than SNMPv1. The value of this object SHOULD
contain the value of the community string field from
the original SNMPv1 message containing a Trap PDU as
generated by an SNMPv1 agent."
::= { snmpCommunityMIBObjects 4 }
-- Conformance Information *******************************************
snmpCommunityMIBCompliances OBJECT IDENTIFIER
::= { snmpCommunityMIBConformance 1 }
snmpCommunityMIBGroups OBJECT IDENTIFIER
::= { snmpCommunityMIBConformance 2 }
-- Compliance statements
snmpCommunityMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP engines which
implement the SNMP-COMMUNITY-MIB."
MODULE -- this module
MANDATORY-GROUPS { snmpCommunityGroup }
OBJECT snmpCommunityName
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT snmpCommunitySecurityName
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT snmpCommunityContextEngineID
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT snmpCommunityContextName
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT snmpCommunityTransportTag
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT snmpCommunityStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT snmpCommunityStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
::= { snmpCommunityMIBCompliances 1 }
snmpProxyTrapForwardCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP engines which
contain a proxy forwarding application which is
capable of forwarding SNMPv1 traps using SNMPv2c
or SNMPv3."
MODULE -- this module
MANDATORY-GROUPS { snmpProxyTrapForwardGroup }
::= { snmpCommunityMIBCompliances 2 }
snmpCommunityGroup OBJECT-GROUP
OBJECTS {
snmpCommunityName,
snmpCommunitySecurityName,
snmpCommunityContextEngineID,
snmpCommunityContextName,
snmpCommunityTransportTag,
snmpCommunityStorageType,
snmpCommunityStatus,
snmpTargetAddrTMask,
snmpTargetAddrMMS
}
STATUS current
DESCRIPTION
"A collection of objects providing for configuration
of community strings for SNMPv1 (and SNMPv2c) usage."
::= { snmpCommunityMIBGroups 1 }
snmpProxyTrapForwardGroup OBJECT-GROUP
OBJECTS {
snmpTrapAddress,
snmpTrapCommunity
}
STATUS current
DESCRIPTION
"Objects which are used by proxy forwarding applications
when translating traps between SNMP versions. These are
used to preserve SNMPv1-specific information when
translating to SNMPv2c or SNMPv3."
::= { snmpCommunityMIBGroups 3 }
END
Mr. DellatioNx196 GaLers xh3LL Backd00r 1.0, Coded By Mr. DellatioNx196 - Bogor BlackHat