Current File : //usr/share/snmp/mibs/DISMAN-SCHEDULE-MIB.txt
DISMAN-SCHEDULE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Integer32, Unsigned32, Counter32, mib-2, zeroDotZero
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DateAndTime, RowStatus, StorageType, VariablePointer
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB;
schedMIB MODULE-IDENTITY
LAST-UPDATED "200201070000Z"
ORGANIZATION "IETF Distributed Management Working Group"
CONTACT-INFO
"WG EMail: disman@dorothy.bmc.com
Subscribe: disman-request@dorothy.bmc.com
Chair: Randy Presuhn
BMC Software, Inc.
Postal: Office 1-3141
2141 North First Street
San Jose, California 95131
USA
EMail: rpresuhn@bmc.com
Phone: +1 408 546-1006
Editor: David B. Levi
Nortel Networks
Postal: 4401 Great America Parkway
Santa Clara, CA 95052-8185
USA
EMail: dlevi@nortelnetworks.com
Phone: +1 865 686 0432
Editor: Juergen Schoenwaelder
TU Braunschweig
Postal: Bueltenweg 74/75
38106 Braunschweig
Germany
EMail: schoenw@ibr.cs.tu-bs.de
Phone: +49 531 391-3283"
DESCRIPTION
"This MIB module defines a MIB which provides mechanisms to
schedule SNMP set operations periodically or at specific
points in time."
REVISION "200201070000Z"
DESCRIPTION
"Revised version, published as RFC 3231.
This revision introduces a new object type called
schedTriggers. Created new conformance and compliance
statements that take care of the new schedTriggers object.
Several clarifications have been added to remove ambiguities
that were discovered and reported by implementors."
REVISION "199811171800Z"
DESCRIPTION
"Initial version, published as RFC 2591."
::= { mib-2 63 }
--
-- The various groups defined within this MIB definition:
--
schedObjects OBJECT IDENTIFIER ::= { schedMIB 1 }
schedNotifications OBJECT IDENTIFIER ::= { schedMIB 2 }
schedConformance OBJECT IDENTIFIER ::= { schedMIB 3 }
--
-- Textual Conventions:
--
SnmpPduErrorStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC enumerates the SNMPv1 and SNMPv2 PDU error status
codes as defined in RFC 1157 and RFC 1905. It also adds a
pseudo error status code `noResponse' which indicates a
timeout condition."
SYNTAX INTEGER {
noResponse(-1),
noError(0),
tooBig(1),
noSuchName(2),
badValue(3),
readOnly(4),
genErr(5),
noAccess(6),
wrongType(7),
wrongLength(8),
wrongEncoding(9),
wrongValue(10),
noCreation(11),
inconsistentValue(12),
resourceUnavailable(13),
commitFailed(14),
undoFailed(15),
authorizationError(16),
notWritable(17),
inconsistentName(18)
}
--
-- Some scalars which provide information about the local time zone.
--
schedLocalTime OBJECT-TYPE
SYNTAX DateAndTime (SIZE (11))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local time used by the scheduler. Schedules which
refer to calendar time will use the local time indicated
by this object. An implementation MUST return all 11 bytes
of the DateAndTime textual-convention so that a manager
may retrieve the offset from GMT time."
::= { schedObjects 1 }
--
-- The schedule table which controls the scheduler.
--
schedTable OBJECT-TYPE
SYNTAX SEQUENCE OF SchedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines scheduled actions triggered by
SNMP set operations."
::= { schedObjects 2 }
schedEntry OBJECT-TYPE
SYNTAX SchedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describing a particular scheduled action.
Unless noted otherwise, writable objects of this row
can be modified independent of the current value of
schedRowStatus, schedAdminStatus and schedOperStatus.
In particular, it is legal to modify schedInterval
and the objects in the schedCalendarGroup when
schedRowStatus is active and schedAdminStatus and
schedOperStatus are both enabled."
INDEX { schedOwner, schedName }
::= { schedTable 1 }
SchedEntry ::= SEQUENCE {
schedOwner SnmpAdminString,
schedName SnmpAdminString,
schedDescr SnmpAdminString,
schedInterval Unsigned32,
schedWeekDay BITS,
schedMonth BITS,
schedDay BITS,
schedHour BITS,
schedMinute BITS,
schedContextName SnmpAdminString,
schedVariable VariablePointer,
schedValue Integer32,
schedType INTEGER,
schedAdminStatus INTEGER,
schedOperStatus INTEGER,
schedFailures Counter32,
schedLastFailure SnmpPduErrorStatus,
schedLastFailed DateAndTime,
schedStorageType StorageType,
schedRowStatus RowStatus,
schedTriggers Counter32
}
schedOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The owner of this scheduling entry. The exact semantics of
this string are subject to the security policy defined by
the security administrator."
::= { schedEntry 1 }
schedName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The locally-unique, administratively assigned name for this
scheduling entry. This object allows a schedOwner to have
multiple entries in the schedTable."
::= { schedEntry 2 }
schedDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The human readable description of the purpose of this
scheduling entry."
DEFVAL { "" }
::= { schedEntry 3 }
schedInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds between two action invocations of
a periodic scheduler. Implementations must guarantee
that action invocations will not occur before at least
schedInterval seconds have passed.
The scheduler must ignore all periodic schedules that
have a schedInterval value of 0. A periodic schedule
with a scheduling interval of 0 seconds will therefore
never invoke an action.
Implementations may be forced to delay invocations in the
face of local constraints. A scheduled management function
should therefore not rely on the accuracy provided by the
scheduler implementation.
Note that implementations which maintain a list of pending
activations must re-calculate them when this object is
changed."
DEFVAL { 0 }
::= { schedEntry 4 }
schedWeekDay OBJECT-TYPE
SYNTAX BITS {
sunday(0),
monday(1),
tuesday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of weekdays on which the scheduled action should
take place. Setting multiple bits will include several
weekdays in the set of possible weekdays for this schedule.
Setting all bits will cause the scheduler to ignore the
weekday.
Note that implementations which maintain a list of pending
activations must re-calculate them when this object is
changed."
DEFVAL { {} }
::= { schedEntry 5 }
schedMonth OBJECT-TYPE
SYNTAX BITS {
january(0),
february(1),
march(2),
april(3),
may(4),
june(5),
july(6),
august(7),
september(8),
october(9),
november(10),
december(11)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of months during which the scheduled action should
take place. Setting multiple bits will include several
months in the set of possible months for this schedule.
Setting all bits will cause the scheduler to ignore the
month.
Note that implementations which maintain a list of pending
activations must re-calculate them when this object is
changed."
DEFVAL { {} }
::= { schedEntry 6 }
schedDay OBJECT-TYPE
SYNTAX BITS {
d1(0), d2(1), d3(2), d4(3), d5(4),
d6(5), d7(6), d8(7), d9(8), d10(9),
d11(10), d12(11), d13(12), d14(13), d15(14),
d16(15), d17(16), d18(17), d19(18), d20(19),
d21(20), d22(21), d23(22), d24(23), d25(24),
d26(25), d27(26), d28(27), d29(28), d30(29),
d31(30),
r1(31), r2(32), r3(33), r4(34), r5(35),
r6(36), r7(37), r8(38), r9(39), r10(40),
r11(41), r12(42), r13(43), r14(44), r15(45),
r16(46), r17(47), r18(48), r19(49), r20(50),
r21(51), r22(52), r23(53), r24(54), r25(55),
r26(56), r27(57), r28(58), r29(59), r30(60),
r31(61)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of days in a month on which a scheduled action
should take place. There are two sets of bits one can
use to define the day within a month:
Enumerations starting with the letter 'd' indicate a
day in a month relative to the first day of a month.
The first day of the month can therefore be specified
by setting the bit d1(0) and d31(30) means the last
day of a month with 31 days.
Enumerations starting with the letter 'r' indicate a
day in a month in reverse order, relative to the last
day of a month. The last day in the month can therefore
be specified by setting the bit r1(31) and r31(61) means
the first day of a month with 31 days.
Setting multiple bits will include several days in the set
of possible days for this schedule. Setting all bits will
cause the scheduler to ignore the day within a month.
Setting all bits starting with the letter 'd' or the
letter 'r' will also cause the scheduler to ignore the
day within a month.
Note that implementations which maintain a list of pending
activations must re-calculate them when this object is
changed."
DEFVAL { {} }
::= { schedEntry 7 }
schedHour OBJECT-TYPE
SYNTAX BITS {
h0(0), h1(1), h2(2), h3(3), h4(4),
h5(5), h6(6), h7(7), h8(8), h9(9),
h10(10), h11(11), h12(12), h13(13), h14(14),
h15(15), h16(16), h17(17), h18(18), h19(19),
h20(20), h21(21), h22(22), h23(23)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of hours within a day during which the scheduled
action should take place.
Note that implementations which maintain a list of pending
activations must re-calculate them when this object is
changed."
DEFVAL { {} }
::= { schedEntry 8 }
schedMinute OBJECT-TYPE
SYNTAX BITS {
m0(0), m1(1), m2(2), m3(3), m4(4),
m5(5), m6(6), m7(7), m8(8), m9(9),
m10(10), m11(11), m12(12), m13(13), m14(14),
m15(15), m16(16), m17(17), m18(18), m19(19),
m20(20), m21(21), m22(22), m23(23), m24(24),
m25(25), m26(26), m27(27), m28(28), m29(29),
m30(30), m31(31), m32(32), m33(33), m34(34),
m35(35), m36(36), m37(37), m38(38), m39(39),
m40(40), m41(41), m42(42), m43(43), m44(44),
m45(45), m46(46), m47(47), m48(48), m49(49),
m50(50), m51(51), m52(52), m53(53), m54(54),
m55(55), m56(56), m57(57), m58(58), m59(59)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of minutes within an hour when the scheduled action
should take place.
Note that implementations which maintain a list of pending
activations must re-calculate them when this object is
changed."
DEFVAL { {} }
::= { schedEntry 9 }
schedContextName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The context which contains the local MIB variable pointed
to by schedVariable."
DEFVAL { "" }
::= { schedEntry 10 }
schedVariable OBJECT-TYPE
SYNTAX VariablePointer
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An object identifier pointing to a local MIB variable
which resolves to an ASN.1 primitive type of INTEGER."
DEFVAL { zeroDotZero }
::= { schedEntry 11 }
schedValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value which is written to the MIB object pointed to by
schedVariable when the scheduler invokes an action. The
implementation shall enforce the use of access control
rules when performing the set operation on schedVariable.
This is accomplished by calling the isAccessAllowed abstract
service interface as defined in RFC 2571.
Note that an implementation may choose to issue an SNMP Set
message to the SNMP engine and leave the access control
decision to the normal message processing procedure."
DEFVAL { 0 }
::= { schedEntry 12 }
schedType OBJECT-TYPE
SYNTAX INTEGER {
periodic(1),
calendar(2),
oneshot(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of this schedule. The value periodic(1) indicates
that this entry specifies a periodic schedule. A periodic
schedule is defined by the value of schedInterval. The
values of schedWeekDay, schedMonth, schedDay, schedHour
and schedMinute are ignored.
The value calendar(2) indicates that this entry describes a
calendar schedule. A calendar schedule is defined by the
values of schedWeekDay, schedMonth, schedDay, schedHour and
schedMinute. The value of schedInterval is ignored. A
calendar schedule will trigger on all local times that
satisfy the bits set in schedWeekDay, schedMonth, schedDay,
schedHour and schedMinute.
The value oneshot(3) indicates that this entry describes a
one-shot schedule. A one-shot schedule is similar to a
calendar schedule with the additional feature that it
disables itself by changing in the `finished'
schedOperStatus once the schedule triggers an action.
Note that implementations which maintain a list of pending
activations must re-calculate them when this object is
changed."
DEFVAL { periodic }
::= { schedEntry 13 }
schedAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state of the schedule."
DEFVAL { disabled }
::= { schedEntry 14 }
schedOperStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2),
finished(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of this schedule. The state
enabled(1) indicates this entry is active and that the
scheduler will invoke actions at appropriate times. The
disabled(2) state indicates that this entry is currently
inactive and ignored by the scheduler. The finished(3)
state indicates that the schedule has ended. Schedules
in the finished(3) state are ignored by the scheduler.
A one-shot schedule enters the finished(3) state when it
deactivates itself.
Note that the operational state must not be enabled(1)
when the schedRowStatus is not active."
::= { schedEntry 15 }
schedFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable counts the number of failures while invoking
the scheduled action. This counter at most increments once
for a triggered action."
::= { schedEntry 16 }
schedLastFailure OBJECT-TYPE
SYNTAX SnmpPduErrorStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The most recent error that occurred during the invocation of
a scheduled action. The value noError(0) is returned
if no errors have occurred yet."
DEFVAL { noError }
::= { schedEntry 17 }
schedLastFailed OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the most recent failure occurred.
The value '0000000000000000'H is returned if no failure
occurred since the last re-initialization of the scheduler."
DEFVAL { '0000000000000000'H }
::= { schedEntry 18 }
schedStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines whether this scheduled action is kept
in volatile storage and lost upon reboot or if this row is
backed up by non-volatile or permanent storage.
Conceptual rows having the value `permanent' must allow
write access to the columnar objects schedDescr,
schedInterval, schedContextName, schedVariable, schedValue,
and schedAdminStatus. If an implementation supports the
schedCalendarGroup, write access must be also allowed to
the columnar objects schedWeekDay, schedMonth, schedDay,
schedHour, schedMinute."
DEFVAL { volatile }
::= { schedEntry 19 }
schedRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this scheduled action. A control that allows
entries to be added and removed from this table.
Note that the operational state must change to enabled
when the administrative state is enabled and the row
status changes to active(1).
Attempts to destroy(6) a row or to set a row
notInService(2) while the operational state is enabled
result in inconsistentValue errors.
The value of this object has no effect on whether other
objects in this conceptual row can be modified."
::= { schedEntry 20 }
schedTriggers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable counts the number of attempts (either
successful or failed) to invoke the scheduled action."
::= { schedEntry 21 }
--
-- Notifications that are emitted to indicate failures. The
-- definition of schedTraps makes notification registrations
-- reversible (see STD 58, RFC 2578).
--
schedTraps OBJECT IDENTIFIER ::= { schedNotifications 0 }
schedActionFailure NOTIFICATION-TYPE
OBJECTS { schedLastFailure, schedLastFailed }
STATUS current
DESCRIPTION
"This notification is generated whenever the invocation of a
scheduled action fails."
::= { schedTraps 1 }
-- conformance information
schedCompliances OBJECT IDENTIFIER ::= { schedConformance 1 }
schedGroups OBJECT IDENTIFIER ::= { schedConformance 2 }
-- compliance statements
schedCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
the scheduling MIB."
MODULE -- this module
MANDATORY-GROUPS {
schedGroup2, schedNotificationsGroup
}
GROUP schedCalendarGroup
DESCRIPTION
"The schedCalendarGroup is mandatory only for those
implementations that support calendar based schedules."
OBJECT schedType
DESCRIPTION
"The values calendar(2) or oneshot(3) are not valid for
implementations that do not implement the
schedCalendarGroup. Such an implementation must return
inconsistentValue error responses for attempts to set
schedAdminStatus to calendar(2) or oneshot(3)."
::= { schedCompliances 2 }
schedGroup2 OBJECT-GROUP
OBJECTS {
schedDescr, schedInterval, schedContextName,
schedVariable, schedValue, schedType,
schedAdminStatus, schedOperStatus, schedFailures,
schedLastFailure, schedLastFailed, schedStorageType,
schedRowStatus, schedTriggers
}
STATUS current
DESCRIPTION
"A collection of objects providing scheduling capabilities."
::= { schedGroups 4 }
schedCalendarGroup OBJECT-GROUP
OBJECTS {
schedLocalTime, schedWeekDay, schedMonth,
schedDay, schedHour, schedMinute
}
STATUS current
DESCRIPTION
"A collection of objects providing calendar based schedules."
::= { schedGroups 2 }
schedNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
schedActionFailure
}
STATUS current
DESCRIPTION
"The notifications emitted by the scheduler."
::= { schedGroups 3 }
--
-- Deprecated compliance and conformance group definitions
-- from RFC 2591.
--
schedCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for SNMP entities which implement
the scheduling MIB."
MODULE -- this module
MANDATORY-GROUPS {
schedGroup, schedNotificationsGroup
}
GROUP schedCalendarGroup
DESCRIPTION
"The schedCalendarGroup is mandatory only for those
implementations that support calendar based schedules."
OBJECT schedType
DESCRIPTION
"The values calendar(2) or oneshot(3) are not valid for
implementations that do not implement the
schedCalendarGroup. Such an implementation must return
inconsistentValue error responses for attempts to set
schedAdminStatus to calendar(2) or oneshot(3)."
::= { schedCompliances 1 }
schedGroup OBJECT-GROUP
OBJECTS {
schedDescr, schedInterval, schedContextName,
schedVariable, schedValue, schedType,
schedAdminStatus, schedOperStatus, schedFailures,
schedLastFailure, schedLastFailed, schedStorageType,
schedRowStatus
}
STATUS deprecated
DESCRIPTION
"A collection of objects providing scheduling capabilities."
::= { schedGroups 1 }
END
Mr. DellatioNx196 GaLers xh3LL Backd00r 1.0, Coded By Mr. DellatioNx196 - Bogor BlackHat