Mister Spy Say ="Hello Kids ... :D"
___ ____ _ _____
| \/ (_) | | / ___|
| . . |_ ___| |_ ___ _ __ \ `--. _ __ _ _
| |\/| | / __| __/ _ \ '__| `--. \ '_ \| | | |
| | | | \__ \ || __/ | /\__/ / |_) | |_| |
\_| |_/_|___/\__\___|_| \____/| .__/ \__, |
| | __/ |
|_| |___/
Bot Mister Spy V3
Mister Spy
Mister Spy
1.30 2020-01-26
- Identical to 1.30.
1.29 2020-01-18 (TRIAL RELEASE)
- Added timelocal_posix() and timegm_posix() subs. These are _exact_ opposites
of Perl's localtime() and gmtime(), meaning that a round trip between the
two pairs always produces the same value.
1.28 2018-06-12
- Some tests which required support for epoch values larger than 2**32 were
not being skipped when the underlying Perl did not support that.
1.27 2018-06-09
- This release is identical to 1.26 except that it is a stable release, not a
trial.
- Fixed the tests so they will not break in the year 2020. The tests were
passing in 2-digit years on the assumption that a year like "70" would be
treated as 1970, but starting in 2020 this would be treated as 2070
instead. Reported by Bernhard M. Wiedemann. RT #124787.
- Added timelocal_modern and timegm_modern variants as optional exports. These
versions do not munge years at all. They treat the year value that they are
given exactly as-is.
1.26 2018-05-20 (TRIAL RELEASE)
- Fixed the tests so they will not break in the year 2020. The tests were
passing in 2-digit years on the assumption that a year like "70" would be
treated as 1970, but starting in 2020 this would be treated as 2070
instead. Reported by Bernhard M. Wiedemann. RT #124787.
- Added timelocal_modern and timegm_modern variants as optional exports. These
versions do not munge years at all. They treat the year value that they are
given exactly as-is.
1.25 2016-11-17
- Reduce memory usage by only loading Config if needed and not importing from
Carp. Based on PR #2 from J. Nick Coston.
1.24 2016-08-13
- Set the INSTALLDIRS to 'perl' for Perl 5.10 and earlier. Without this, you
can upgrade Time::Local from CPAN but perl will not see the upgraded
version. Reported by Olivier Mengué. RT #116825.
1.2300 2012-07-20
- Doh, fix the repo & bugtracker info in the META files.
1.2200 2012-07-09
- Explicitly require Test::More 0.88+ for tests.
1.2100 2012-07-09
- A seconds value greater than 59 but less than 60 caused timegm() and
timelocal() to croak. Now we allow any value that's less than 60. RT #78189.
1.2000 2011-01-02
- Release 1.1902 as a stable version without any further chances.
1.1902 2010-12-16 TRIAL RELEASE
- Merge all changes from blead perl.
- Try to restore compatibility with older perls, which don't have a 64bit
capable localtime/gmtime.
1.1901 2008-11-01
- Test fixes only. The tests planned the wrong number of tests on
32-bit platforms, causing failures.
1.19 2008-11-01
- The calculation of the maximum integer size was using
$Config{intsize} when it should use $Config{ivsize}. Apparently on a
64-bit platform intsize can be 4 when ivsize is 8. Based on a patch
from Jan Dubois.
1.18 2007-10-31
- Added pod and pod coverage tests.
- Doing a new release to provide a conformant META.yml file.
- This release contains no code changes from 1.17.
1.17 2007-01-25
- I made the same test count mistake as was in 1.14 again. This
release fixes the test count (again) when running on a system that
doesn't support negative epochs (like Win32). Patched by Kenichi
Ishigaki (again).
1.16 2007-01-23
- The leap year fix in 1.14 was pretty broken, as it checked after
converting the year to Perl's internal (year - 1900) format.
1.15 2007-01-22
- Fix Local.t test count when running on a system that doesn't support
negative epochs (like Win32). Patched by Kenichi Ishigaki.
1.14 2007-01-21
- Fixed leap year check to produce the right answer for years outside
of the 32-bit epoch range (such as 1900 and 2100). See rt.perl.org
#31241. Reported by Nathan Zook.
1.13 2006-08-09
- Switched to using Test::More for the tests.
- Fixed a bug that occurred around the DST change for Europe/London
(and probably other time zones with a positive UTC offset). If
given, the hour immediately after the change (2:00 AM for
Europe/London), then the returned epoch was 3600 seconds too
large. Reported by Roger Picton. See RT #11662.
1.12_01 2006-03-31
- Reverted changes from 1.07_90 that attempted to extend range of
allowable epoch values around edge cases. It turns out that this was
causing integer overflows
- In one error case, the module could warn and then croak. I changed
it to simply croak with the whole message. Based on a patch by
Michael Schwern from rt.perl.org #36268.
- Removed the code from the docs that implied that the *_nocheck
variants were created for doing date math. They're just for speeding
things up when you have known valid data. If you pass them invalid
data, you'll probably get an incorrect answer. See #31421 on
rt.perl.org for discussion.
1.12 2005-12-18
- Explicitly turn off negative epoch testing on VMS. Change #24310
from bleadperl, Craig Berry.
- In the test suite when checking on whether negative epochs are
allowed, use 3 days before the epoch as a test, because just one
hour before may give false positives (for example on Win32 with the
Borland compiler).
- Reverted an earlier change that slightly extended the range of
values for which timelocal worked (by about a day in either
direction) because it could cause an incorrect answer for certain
epoch values on the date of a DST change. Reported by Gisle Aas.
1.11 2005-02-09
- Try to make detection of supported epoch range a little smarter.
The detection was allowing negative epochs on Win32 but apparently
this doesn't work, and trying to pass a pre-epoch date in just
causes a lot of warnings. This silences warnings during the tests
on windows.
1.10 2004-04-20
- Fix compilation failure with older Test.pm (including the versions
shipped with 5.6.1 and earlier perls). Ticket #6079 on rt.cpan.org.
Patch by somebody who didn't give their name on rt.cpan.org ;)
1.09 2004-04-07
- Fixed a bug in the test suite that led to timegm not getting tested
properly, and timelocal getting tested twice for the same values.
1.08 2004-04-07
- Changed occurences of "UTC" to "GMT" in order to agree with POSIX,
which defines the epoch in terms of GMT.
- Documented the behavior of timelocal() when given a local time that
does not exist (due to a DST change). Suggested by Nick
Ing-Simmons.
- Don't expect edge case tests to pass on AIX 4.3, since the OS is
obsolete. Patch from core passed on my H. Merijn Brand.
1.07_94 2003-12-11
- More changes from Henrik Gulbrandsen to make sure that very large
negative epoch values are handled properly on platforms that can
handle negative epoch values at all.
- Make sure that we really do always return the earliest of two local
times when DST makes conversion from GMT to local time ambiguous.
Again by Henrik.
- Fix a bug that could have occurred if the maximum or minimum integer
size on a platform was divisible by 86,400. Also by Henrik.
1.07_93 2003-07-23
- Henrik's code explicitly didn't work with negative epoch values,
which is not good. Now we assume that they are allowed, except on
MacOS, which is known to use an unsigned int for time_t.
- Document that dates before the epoch should work on systems which
support negative epoch values, but that we can't test them because
we don't know _which_ systems support this.
1.07_92 2003-07-23
- Removed tests which relied on the zoneinfo database to be up to date
and accurate in order to pass, since we have absolutely no control
over this whatsoever. I hate external dependencies.
1.07_91 2003-07-22
- Henrik refined his edge case fix to work on Win32, which apparently
dislikes large negative signed ints. Tests now pass on Win32. More
testing on other platforms is appreciated.
- Documented Time::Local's behavior when timelocal is called with an
ambiguous local time. Some local times occur twice on the same day
because a DST change causes the clock to move backwards one hour
earlier. See "Ambiguous Local Times" in the docs for more details.
Closes perlbug 7822.
- Removed the statement under "BUGS" that the proclivity to croak() is
probably a bug. It's not a bug, and it sure isn't going to change
at this point in time, anyway!
1.07_90 2003-07-15
- Fixed behavior for edge cases like timegm(gmtime(0x7FFF_FFFF)),
which should work even on platforms where time_t is signed. Patch
from Henrik Gulbrandsen.
1.07 2003-06-10
- Set INSTALLDIRS=perl in Makefile.PL, as suggested by Michael
Schwern, who heard it from Sergio Brandano.
1.06 2003-06-04
- A bug in the handling of negative offsets from UTC could lead to the
return of invalid times during a DST transition. This is from a
patch by Dave Mitchell currently in bleadperl. See
http://bugs6.perl.org/rt2/Ticket/Display.html?id=19393 for details.
Thanks to Rafael Garcia-Suarez for pointing this out to me.
- Updated the AUTHORS section to include the actual authors. Thanks
to Graham Barr for telling me who there are.
- Added SUPPORT section which tells people to use bugs.perl.org or
perlbug, since I read p5p and I want to make sure that the core and
this code stay in sync.
- Clarified docs to say that dates before the system's epoch may or
may not work, because POSIX only requires support for positive
time_t values.
1.05 2003-06-03
This version is nearly identical to version 1.04, which is included in
the Perl core, but it removes the use of "our" in order to make the
code backwards compatible with Perl 5.00503. It probably works with
earlier versions of Perl as well, but I don't have anything earlier
than 5.00503 installed.
Changes made from the core version include:
- Packaged for distribution on CPAN.
- Added an AUTHOR section to the docs.
- Clarified some points in the docs, particularly the fact that this
module uses the local system's epoch, not the Unix epoch, contrary
to what the documentation suggests.
- Disabled tests for timelocal.pl Perl4 library since it's not
included in standalone distribution.
Mr. DellatioNx196 GaLers xh3LL Backd00r 1.0, Coded By Mr. DellatioNx196 - Bogor BlackHat