Linux utility for listing SCSI devices.
Changelog for released lsscsi-0.32 [20210505] [svn: r167]
- improve NVMe device parsing (e.g. /dev/nvme0c1n2)
- print nr_hw_queues when available for SCSI hosts
- Remove blank line after NVMe device name with -HL
- collect_disk_wwn_nodes: Fix WWN string copy
- make WWN printing for NVMe more consistent with
output from SCSI devices (e.g. with -u and -t)
- logic to select best SCSI id (--scsi_id) to output
- clean up warnings for gcc-10
- build with autoconf 2.70
Changelog for released lsscsi-0.31 [20200220] [svn: r160]
- cleanup gcc-8 warnings, no cleanup needed for gcc-9
- fix issue where host managed ZBC devices don't
output their size. [Fix also for RBC and CD/DVD.]
- exclude NVMe listings when --classic given
- fix hex counting issues
- supply "-" for generic NVMe device one line output
so 'lsscsi -gb' output is consistent
Changelog for released lsscsi-0.30 [20180612] [svn: r154]
- add support for NVMe devices and controllers
- to build without: ./configure --disable-nvme-supp
- deselect at runtime: lsscsi --no-nvme
- deselect SCSI devices at runtime: lsscsi N
- add --brief for tuple + device_name(s) only
- add --pdt (-D) for device type in hex
- extend --size (-s) so when given three times
the size as a logical block count is output
- add --sz-lbs (-S) that is equivalent to '-sss'
when used twice adds comma then logical block size
- '-w' now decodes 128 bit WWN without truncation
- /dev/disk/by-id/wwn- is not guaranteed to be
persistent (or stable); instead use
/dev/disk/by-id/scsi-
- '-t' on a FC host was not printing the comma
separator resulting in garbled output, fix
- debian: bump compat file contents from 7 to 10
Changelog for released lsscsi-0.29 [20160514] [svn: r137]
- '-u' now decodes locally assigned UUIDs (spc5r08)
- as last try use T10 Vendor ID for lu name
- if no lu name found, print 'none'
- change '-uuu' to output the full lu name followed
by the normal fields (which were skipped before)
- add 'U' option, same action as '-uuu'
- '-UU' prefixes lu names with 'eui.', 'naa.', etc
- if '-s' given twice, lu size is base 2 related
- if very long [h:c:t:l] then append space
- print_enclosure_device() for FCP may be useless,
comment out while checking ...
- with '-t' print 0x0000000000000000 for non-SAS
device in SAS domain
- autogen.sh: upgrade to 20091223 version
- automake: upgrade to 1.15 (ubuntu 16.04)
Changelog for released lsscsi-0.28 [20140930] [svn: r120]
- fix handling of scsi_level 0 (no compliance)
- add SRP transport identifier
- add --unit option for LU identifier (>= lk 3.15)
- add (S)ATA transport identifier (>= lk 3.15)
- make USB transport ids more consistent
- fix FC transport id missing comma
- add pdt strings for security manager and zbc
- upgrade automake to version 1.14.1
Changelog for released lsscsi-0.27 [20130508] [svn: r111]
- rework buffer handling for systems with many disks
- add --lunhex option for displaying LUNs in hex
- accept LUNs from sysfs as large as a 64 bit unsigned
decimal number (largest was signed 32 bit decimal)
- accept LSSCSI_LUNHEX_OPT environment variable
- add scsi_id option for /dev/disk/by-id/scsi*
Changelog for released lsscsi-0.26 [20120131] [svn: r97]
- add 'fcoe' transport indicator
- add '--wwn' option, datamine /dev/disk/by-id/wwn*
- move lsscsi.c into src directory
Changelog for released lsscsi-0.25 [20110509] [svn: r92]
- add sas_port and fc_remote_ports transport information
- print enclosure_device entry
- add '--size' option to show size of disks
- add '--protmode' option to show protection information mode
Changelog for released lsscsi-0.24 [20100612] [svn: r83]
Version 0.24 2010/06/12 [svn: r83]
- FC transport syntax changes (colon to slash)
- add "(null)" to the currently accepted "<NULL>" as
the string representation of NULL
- add AM_MAINTAINER_MODE to configure.ac
- scandir() library function has changed its signature
in its 4th argument, use newer (non-void) variant
<< Retrospectively changed "version" to "release" in this file >>
Version 0.23 2009/12/01 [svn: r76]
- remove /proc/mounts scan for sysfs mount point, assume
/sys unless overridden by re-instated '--sysfsroot' option
Version 0.22 2008/12/26 [svn: r71]
- add protection information (see CREDITS file)
- add USB transport type with USB device name
- add ATA and SATA transport types (crude: by driver name)
Version 0.21 2008/7/10 [svn: r64]
- more sysfs scanning work needed for lk 2.6.26
Version 0.20 2008/7/9 [svn: r43]
- Handle SCSI midlayer rework circa lk 2.6.25/26
- this fix needed if CONFIG_SYSFS_DEPRECATED_V2 is not
defined in the kernel build (lk 2.6.26)
- clean superfluous files from package
Version 0.19 2007/1/25 [svn: r37]
- add transport information (target + initiator)
- start with FC, SAS, SPI, iSCSI and SBP
- alter ISCSI for 2.6.20 changes
- SAS fix for lk 2.6.20 (SYSFS_DEPRECATED=n)
- enhance host name search when proc_name is "<NULL>"
- implement filter option for '--hosts'
- accept 'host<n>' as first item in filter to mean host <n>
- output more host attributes when '-Hll' given
- add '--list' (or '-L') option output attribute=value
entries, one per line
Version 0.18 2006/3/24
- cope with dropping of 'generic' symlink post lk 2.6.16
- anticipate the future removal of 'tape' symlink
Version 0.17 2006/2/6
- fix disappearance of block device names in lk 2.6.16-rc1
Version 0.16 2005/12/30
- clean up peripheral device type naming
- properly identify osst and changer devices
- add debian build directory
Version 0.15 2005/6/29
- option '-ll' gives more attributes and '-lll' gives attributes
one per line
- change reporting if device node:
- use "match major+minor" with "/dev" directory (default)
- use synthetic device node names when '--kname' given
{this was the default in earlier versions}
- add filtering, sync with lk 2.6.12
{e.g. 'lsscsi 1' lists all SCSI devices on host1}
- convert to autotools
- builds on version 0.13 (does not use libsysfs)
{because dlist_sort_custom() does not have filter() callback}
Version 0.14 2004/9/20
- version of 0.13 based on libsysfs-1.20
Version 0.13 2004/8/20
- add 'timeout' to long device option output
- quiet (unless verbose) if no mid level (hence no SCSI devices or hosts)
Version 0.12 2004/5/9
- rework for lk 2.6.6
- add proc_name for hosts
- replace 'online' with 'state' for scsi devices
- add '-d' option to output device node's major and minor numbers
Version 0.11 2004/1/9
- rework for lk 2.6.1
- drop "--name" argument
Version 0.10 2003/5/6
- adjust HBA listing (-H) for new struct scsi_host in lk 2.5.69++
Version 0.09 2003/4/4
- fix up sorting
- add GPL + copyright notice
Version 0.08 2003/3/2
- start to add host listing support (requires >= lk 2.5.63)
Version 0.07 2003/2/10
- sysfs changes name of current_queue_depth in lk 2.5.60
Version 0.06 2003/1/20
- fixes of osst devices
- use "cd" rather than "CDROM" for short peripheral type name
Version 0.05 2003/1/19
- output st and osst device names (rather than "-")
- support --generic and --classic together
- output type (SCSI peripheral type) with --long
Version 0.04 2003/1/14
- make sure a st device list only once (needed for lk 2.5.57)
Version 0.03 2003/1/9
- fix Makefile to create man page directory on install
- add logic for scsi_level output
- add --generic (-g) switch to output scsi generic device file name
Version 0.02 2002/12/18
- first entry in CHANGELOG
Mr. DellatioNx196 GaLers xh3LL Backd00r 1.0, Coded By Mr. DellatioNx196 - Bogor BlackHat