Begin4
Title: hdparm
Version: 9.62
Entered-date: 2021-05-10
Description: hdparm - get/set hard disk parameters for Linux SATA/IDE drives.
v9.62 work around unexpected sign-extending of left-shifted unsigned values by gcc
v9.61 fixes for --set-sector-size and reporting of physical/logical sector sizes, courtesy of Western Digital
v9.60 Add support for ioSafe Solo with jMicron USB/SATA bridge, courtesy Matthias-Christian Ott
v9.59 various minor fixes
v9.58 fixed -I crash on non-ATA
v9.57 added --set-sector-size, general support for non-512 byte partitions
v9.56 fixed --Istdout, added --Iraw
v9.55 #include <sys/sysmacros.h>
v9.54 partial revert of JMicron changes.
v9.53 Read Drive Capacity fixes, SET MAX ADDRESS fixes, fwdownload fixes.
v9.52 added JMicron USB-SATA bridge support, courtesy Jan Friesse <jfriesse@gmail.com>.
v9.51 minor fixes/tweaks, new --security-prompt-for-password flag.
v9.50 minor fixes for sanitize device stuff.
v9.49 bugfixes and ACS-3 enhancements.
v9.48 fix devslp bugs
v9.47 devslp reporting support
v9.46 added "hex:xxxxxxxx" format for binary security passwords; misc small fixes
v9.45 fixed fibmap block size; other minor stuff.
v9.44 better sgio compatibility with kernel; fwdownload mode "E"; longer erase timeout; etc.
v9.43 rearrange flag execution so that the idle/standby/sleep "now" flags are executed last.
v9.42 lots of fixes from the sourceforge queue
v9.41 updated SCT identification, other small fixes.
v9.40 internal release
v9.39 Added -R, courtesy of Gordan Bobic
v9.38 Added -J, fixed erase timeouts, updated wiper.sh
v9.37 Enable --fibmap to work on RAID1; other tweaks
v9.36 manpage updates, wiper.sh version 3.1
v9.35 Fixed CDB breakage from v9.34; -B works again now
v9.34 Fixed CDB transfer length bug that affected some commands
v9.33 Fixed AHCI issues; fixed compilation on older systems
v9.32 Fixed various commands broken since 9.27. Eg. -B, -M, etc..
v9.31 Fixed security-erase issues; changed default of --user-master to user
v9.30 Restrict LBA range counts for TRIM to what the drive reports it can handle
v9.29 Assorted fixes, updated wiper.sh, made trim compatible with many more SSDs
v9.28 Assorted fixes, updated wiper.sh
v9.27 Fix compatibility with old IDE drivers; was broken for many versions now
v9.26 Fix old -i model-name bug; fixed --security-erase-enhanced; other fixes
v9.25 Limit --trim-sector-ranges-stdin to max_sectors_kb per TRIM command
v9.24 Fixed nasty malloc() bug in --trim-sector-ranges code
v9.23 Added --trim-sector-ranges-stdin flag
v9.22 Workaround ext4 FEIMAP bug, revamped wiper.sh with xfs support
v9.21 Fixes and speedups to wiper.sh script; no changes to hdparm itself
v9.20 Reworked --trim-sector-ranges; replaced b0rked wiper scripts with wiper.sh
v9.19 Fixed compile of fallocate.c on older systems; fixed manpage for --fallocate
v9.18 Fixed -E (set streaming) for DVD drives
v9.17 Lots of changes to support SSD TRIM functionality
v9.16 Fixed/tested --fwdownload flags; fixed other bugs
v9.15 Fix big-endian bugs
v9.14 Show TRIM support in -I; use O_RDONLY when opening the device
v9.13 Fix --direct for arch's other than x86 (eg. arm); strip -i strings
v9.12 Lots of -I updates, -C updates; -B now reports current APM setting
v9.11 Fixed -I for ATAPI; added --prefer-ata12 for some USB enclosures
v9.10 Fixes for CF card detection/reporting
v9.9 Recalculate cyls when kernel returns a truncated value
v9.8 FIX -N for non-LBA48 drives
v9.7 FIX LBA28/48 BUGS, favour ATA_12 over ATA_16 when possible (helps with USB)
v9.6 fix -N for 1.5TB drives
v9.5 byteswap ID strings in fwdownload workarounds
v9.4 nuked --fwdownload80 in favour of model-specific workarounds
v9.3 new --idle-immediate and --idle-unload commands
v9.2 fix WWN (worldwide name) output from -I
v9.1 tidy output of --dco-identify, update manpage
v9.0 new --dco-* and --fwdownload flags, sg16 fixes, updated debian subdir
v8.9 make compatible with /sys/block symlinks
v8.8 bug fixes from v8.7, including -r, -a, -Q
v8.7 new sysfs support, fibmap, misc fixes
v8.6 add partition safeguards to r/w/b sector flags
v8.5 fix broken --security-* commands (buggy passwd in all prior 8.x versions)
v8.4 fix broken --write-sector from v8.3
v8.3 use exit(errno) on program completion; fix udma6 display for -i
v8.2 fixed sector ops (and other stuff) to work with non-libata IDE driver again
v8.1 fixed -U, updated -I info
v8.0 some fixes, lots of new features (eg. --make-bad-sector and friends)
v7.7 fixed bug with incorrect settings shown after -W0 (and others)
v7.6 new -F flag; re-allow use of --security-freeze with other flags
v7.5 beef up warnings for -s1: Joe User should never use this flag!
v7.4 added CFA advanced timing info
v7.3 fixed version number; much better SAT compliance
v7.2 fixed breakage when used with old IDE driver
v7.1 big-endian fixes for -I, --Istdin, --Istdout
v7.0 major overhaul, proper SATA support, new features and tweaks
v6.9 --Istdin fix, new -s flag, new SCT reporting, fixed -T x2 error..
v6.8 improve parsing/operation of --Istdin function
v6.7 misc fixes, new -H flag, fixed -C flag
v6.6 fix build on Redhat/Fedora
v6.5 fix -I bugs introduced in v6.4
v6.4 major update for -I, bug fix for -C
v6.3 report ATA revisions > 7
v6.2 major rework of ATA Security Commands
v6.1 bug fix for BLKGETSIZE
v6.0 bug fix for BLKGETSIZE64; new ATA Security Commands
v5.9 bug fix: -W1/-W0 now work again
v5.8 minor fixes
v5.7 bug fixes, --direct flag (O_DIRECT), other enhancements
v5.6 cleanups, new "-Istdout" flag, removed MAJOR-nr restrictions
v5.5 added debian scripts, minor fixes
v5.4 lots of fixes/updates, new timing measurement code
v5.3 endian fixes, other stuff
v5.2 compile fixes for 2.5.xx
v5.1 fixed segfault in "-i" on older drives
v5.0 lots of updates and new features
v4.9 fixed compile error with 2.5.xx kernels
v4.8 changed -Q to allow specifying queue depth
v4.7 added -z, -Q, -M flags; expanded parm range for -p
v4.6 manpage updates, version number corrections
v4.5 cleanups, mostly courtesy of Maciej W. Rozycki
v4.4 added -b option get/set bus state
v4.3 use unsigned format for most stuff
v4.2 lots of updates, rewritten -I option
v4.0 no such version ever released
v3.9 support for ide[6-9], more cosmetics
v3.8 added -E, -R, and -U options; cosmetic fixes
v3.7 added UDMA mode display
v3.6 mostly cosmetic fixes, xt & ide4+ide5 support
v3.5 fixed udma display/compile for older kernels
v3.4 mostly cosmetic updates
v3.3 add -C, -y, -Y flags for power management
v3.2 flush buffer cache after -t or -T
v3.1 add support for "-p[6789]"
v3.0 move cache timings to new -T option
v2.9 update author's email addr; document -I option
v2.8 some fixes; removed "Estimating raw driver speed" from -t
v2.7 fixed "hdparm -c" (broke in 2.6); fixed .lsm file
v2.6 added "-p" flag to set IDE interface chipset PIO modes
v2.5 cosmetic fixes, manpage clarifications
v2.4 added support for -d (DMA) flag
v2.3 added runtime flags for 32-bit mode; fixed -t for SCSI.
v2.0 adds zillions of features for the new (E)IDE driver
Keywords: ide eide ata atapi performance kernel cd cdrom disk device driver
Author: mlord@pobox.com (Mark Lord)
Maintained-by: mlord@pobox.com (Mark Lord)
Primary-site: http://sourceforge.net/projects/hdparm/
Alternate-site: http://www.ibiblio.org/pub/Linux/system/hardware
140K hdparm-9.62.tar.gz
7K hdparm.lsm
Platforms: Linux
Copying-policy: BSD License
End
Mr. DellatioNx196 GaLers xh3LL Backd00r 1.0, Coded By Mr. DellatioNx196 - Bogor BlackHat