/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/* Copyright (c) 2021-2022, NVIDIA CORPORATION & AFFILIATES.
*/
#ifndef _IOMMUFD_H
#define _IOMMUFD_H
#include <linux/types.h>
#include <linux/ioctl.h>
#define IOMMUFD_TYPE (';')
/**
* DOC: General ioctl format
*
* The ioctl interface follows a general format to allow for extensibility. Each
* ioctl is passed in a structure pointer as the argument providing the size of
* the structure in the first u32. The kernel checks that any structure space
* beyond what it understands is 0. This allows userspace to use the backward
* compatible portion while consistently using the newer, larger, structures.
*
* ioctls use a standard meaning for common errnos:
*
* - ENOTTY: The IOCTL number itself is not supported at all
* - E2BIG: The IOCTL number is supported, but the provided structure has
* non-zero in a part the kernel does not understand.
* - EOPNOTSUPP: The IOCTL number is supported, and the structure is
* understood, however a known field has a value the kernel does not
* understand or support.
* - EINVAL: Everything about the IOCTL was understood, but a field is not
* correct.
* - ENOENT: An ID or IOVA provided does not exist.
* - ENOMEM: Out of memory.
* - EOVERFLOW: Mathematics overflowed.
*
* As well as additional errnos, within specific ioctls.
*/
enum {
IOMMUFD_CMD_BASE = 0x80,
IOMMUFD_CMD_DESTROY = IOMMUFD_CMD_BASE,
IOMMUFD_CMD_IOAS_ALLOC,
IOMMUFD_CMD_IOAS_ALLOW_IOVAS,
IOMMUFD_CMD_IOAS_COPY,
IOMMUFD_CMD_IOAS_IOVA_RANGES,
IOMMUFD_CMD_IOAS_MAP,
IOMMUFD_CMD_IOAS_UNMAP,
IOMMUFD_CMD_OPTION,
IOMMUFD_CMD_VFIO_IOAS,
IOMMUFD_CMD_HWPT_ALLOC,
IOMMUFD_CMD_GET_HW_INFO,
};
/**
* struct iommu_destroy - ioctl(IOMMU_DESTROY)
* @size: sizeof(struct iommu_destroy)
* @id: iommufd object ID to destroy. Can be any destroyable object type.
*
* Destroy any object held within iommufd.
*/
struct iommu_destroy {
__u32 size;
__u32 id;
};
#define IOMMU_DESTROY _IO(IOMMUFD_TYPE, IOMMUFD_CMD_DESTROY)
/**
* struct iommu_ioas_alloc - ioctl(IOMMU_IOAS_ALLOC)
* @size: sizeof(struct iommu_ioas_alloc)
* @flags: Must be 0
* @out_ioas_id: Output IOAS ID for the allocated object
*
* Allocate an IO Address Space (IOAS) which holds an IO Virtual Address (IOVA)
* to memory mapping.
*/
struct iommu_ioas_alloc {
__u32 size;
__u32 flags;
__u32 out_ioas_id;
};
#define IOMMU_IOAS_ALLOC _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_ALLOC)
/**
* struct iommu_iova_range - ioctl(IOMMU_IOVA_RANGE)
* @start: First IOVA
* @last: Inclusive last IOVA
*
* An interval in IOVA space.
*/
struct iommu_iova_range {
__aligned_u64 start;
__aligned_u64 last;
};
/**
* struct iommu_ioas_iova_ranges - ioctl(IOMMU_IOAS_IOVA_RANGES)
* @size: sizeof(struct iommu_ioas_iova_ranges)
* @ioas_id: IOAS ID to read ranges from
* @num_iovas: Input/Output total number of ranges in the IOAS
* @__reserved: Must be 0
* @allowed_iovas: Pointer to the output array of struct iommu_iova_range
* @out_iova_alignment: Minimum alignment required for mapping IOVA
*
* Query an IOAS for ranges of allowed IOVAs. Mapping IOVA outside these ranges
* is not allowed. num_iovas will be set to the total number of iovas and
* the allowed_iovas[] will be filled in as space permits.
*
* The allowed ranges are dependent on the HW path the DMA operation takes, and
* can change during the lifetime of the IOAS. A fresh empty IOAS will have a
* full range, and each attached device will narrow the ranges based on that
* device's HW restrictions. Detaching a device can widen the ranges. Userspace
* should query ranges after every attach/detach to know what IOVAs are valid
* for mapping.
*
* On input num_iovas is the length of the allowed_iovas array. On output it is
* the total number of iovas filled in. The ioctl will return -EMSGSIZE and set
* num_iovas to the required value if num_iovas is too small. In this case the
* caller should allocate a larger output array and re-issue the ioctl.
*
* out_iova_alignment returns the minimum IOVA alignment that can be given
* to IOMMU_IOAS_MAP/COPY. IOVA's must satisfy::
*
* starting_iova % out_iova_alignment == 0
* (starting_iova + length) % out_iova_alignment == 0
*
* out_iova_alignment can be 1 indicating any IOVA is allowed. It cannot
* be higher than the system PAGE_SIZE.
*/
struct iommu_ioas_iova_ranges {
__u32 size;
__u32 ioas_id;
__u32 num_iovas;
__u32 __reserved;
__aligned_u64 allowed_iovas;
__aligned_u64 out_iova_alignment;
};
#define IOMMU_IOAS_IOVA_RANGES _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_IOVA_RANGES)
/**
* struct iommu_ioas_allow_iovas - ioctl(IOMMU_IOAS_ALLOW_IOVAS)
* @size: sizeof(struct iommu_ioas_allow_iovas)
* @ioas_id: IOAS ID to allow IOVAs from
* @num_iovas: Input/Output total number of ranges in the IOAS
* @__reserved: Must be 0
* @allowed_iovas: Pointer to array of struct iommu_iova_range
*
* Ensure a range of IOVAs are always available for allocation. If this call
* succeeds then IOMMU_IOAS_IOVA_RANGES will never return a list of IOVA ranges
* that are narrower than the ranges provided here. This call will fail if
* IOMMU_IOAS_IOVA_RANGES is currently narrower than the given ranges.
*
* When an IOAS is first created the IOVA_RANGES will be maximally sized, and as
* devices are attached the IOVA will narrow based on the device restrictions.
* When an allowed range is specified any narrowing will be refused, ie device
* attachment can fail if the device requires limiting within the allowed range.
*
* Automatic IOVA allocation is also impacted by this call. MAP will only
* allocate within the allowed IOVAs if they are present.
*
* This call replaces the entire allowed list with the given list.
*/
struct iommu_ioas_allow_iovas {
__u32 size;
__u32 ioas_id;
__u32 num_iovas;
__u32 __reserved;
__aligned_u64 allowed_iovas;
};
#define IOMMU_IOAS_ALLOW_IOVAS _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_ALLOW_IOVAS)
/**
* enum iommufd_ioas_map_flags - Flags for map and copy
* @IOMMU_IOAS_MAP_FIXED_IOVA: If clear the kernel will compute an appropriate
* IOVA to place the mapping at
* @IOMMU_IOAS_MAP_WRITEABLE: DMA is allowed to write to this mapping
* @IOMMU_IOAS_MAP_READABLE: DMA is allowed to read from this mapping
*/
enum iommufd_ioas_map_flags {
IOMMU_IOAS_MAP_FIXED_IOVA = 1 << 0,
IOMMU_IOAS_MAP_WRITEABLE = 1 << 1,
IOMMU_IOAS_MAP_READABLE = 1 << 2,
};
/**
* struct iommu_ioas_map - ioctl(IOMMU_IOAS_MAP)
* @size: sizeof(struct iommu_ioas_map)
* @flags: Combination of enum iommufd_ioas_map_flags
* @ioas_id: IOAS ID to change the mapping of
* @__reserved: Must be 0
* @user_va: Userspace pointer to start mapping from
* @length: Number of bytes to map
* @iova: IOVA the mapping was placed at. If IOMMU_IOAS_MAP_FIXED_IOVA is set
* then this must be provided as input.
*
* Set an IOVA mapping from a user pointer. If FIXED_IOVA is specified then the
* mapping will be established at iova, otherwise a suitable location based on
* the reserved and allowed lists will be automatically selected and returned in
* iova.
*
* If IOMMU_IOAS_MAP_FIXED_IOVA is specified then the iova range must currently
* be unused, existing IOVA cannot be replaced.
*/
struct iommu_ioas_map {
__u32 size;
__u32 flags;
__u32 ioas_id;
__u32 __reserved;
__aligned_u64 user_va;
__aligned_u64 length;
__aligned_u64 iova;
};
#define IOMMU_IOAS_MAP _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_MAP)
/**
* struct iommu_ioas_copy - ioctl(IOMMU_IOAS_COPY)
* @size: sizeof(struct iommu_ioas_copy)
* @flags: Combination of enum iommufd_ioas_map_flags
* @dst_ioas_id: IOAS ID to change the mapping of
* @src_ioas_id: IOAS ID to copy from
* @length: Number of bytes to copy and map
* @dst_iova: IOVA the mapping was placed at. If IOMMU_IOAS_MAP_FIXED_IOVA is
* set then this must be provided as input.
* @src_iova: IOVA to start the copy
*
* Copy an already existing mapping from src_ioas_id and establish it in
* dst_ioas_id. The src iova/length must exactly match a range used with
* IOMMU_IOAS_MAP.
*
* This may be used to efficiently clone a subset of an IOAS to another, or as a
* kind of 'cache' to speed up mapping. Copy has an efficiency advantage over
* establishing equivalent new mappings, as internal resources are shared, and
* the kernel will pin the user memory only once.
*/
struct iommu_ioas_copy {
__u32 size;
__u32 flags;
__u32 dst_ioas_id;
__u32 src_ioas_id;
__aligned_u64 length;
__aligned_u64 dst_iova;
__aligned_u64 src_iova;
};
#define IOMMU_IOAS_COPY _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_COPY)
/**
* struct iommu_ioas_unmap - ioctl(IOMMU_IOAS_UNMAP)
* @size: sizeof(struct iommu_ioas_unmap)
* @ioas_id: IOAS ID to change the mapping of
* @iova: IOVA to start the unmapping at
* @length: Number of bytes to unmap, and return back the bytes unmapped
*
* Unmap an IOVA range. The iova/length must be a superset of a previously
* mapped range used with IOMMU_IOAS_MAP or IOMMU_IOAS_COPY. Splitting or
* truncating ranges is not allowed. The values 0 to U64_MAX will unmap
* everything.
*/
struct iommu_ioas_unmap {
__u32 size;
__u32 ioas_id;
__aligned_u64 iova;
__aligned_u64 length;
};
#define IOMMU_IOAS_UNMAP _IO(IOMMUFD_TYPE, IOMMUFD_CMD_IOAS_UNMAP)
/**
* enum iommufd_option - ioctl(IOMMU_OPTION_RLIMIT_MODE) and
* ioctl(IOMMU_OPTION_HUGE_PAGES)
* @IOMMU_OPTION_RLIMIT_MODE:
* Change how RLIMIT_MEMLOCK accounting works. The caller must have privilege
* to invoke this. Value 0 (default) is user based accouting, 1 uses process
* based accounting. Global option, object_id must be 0
* @IOMMU_OPTION_HUGE_PAGES:
* Value 1 (default) allows contiguous pages to be combined when generating
* iommu mappings. Value 0 disables combining, everything is mapped to
* PAGE_SIZE. This can be useful for benchmarking. This is a per-IOAS
* option, the object_id must be the IOAS ID.
*/
enum iommufd_option {
IOMMU_OPTION_RLIMIT_MODE = 0,
IOMMU_OPTION_HUGE_PAGES = 1,
};
/**
* enum iommufd_option_ops - ioctl(IOMMU_OPTION_OP_SET) and
* ioctl(IOMMU_OPTION_OP_GET)
* @IOMMU_OPTION_OP_SET: Set the option's value
* @IOMMU_OPTION_OP_GET: Get the option's value
*/
enum iommufd_option_ops {
IOMMU_OPTION_OP_SET = 0,
IOMMU_OPTION_OP_GET = 1,
};
/**
* struct iommu_option - iommu option multiplexer
* @size: sizeof(struct iommu_option)
* @option_id: One of enum iommufd_option
* @op: One of enum iommufd_option_ops
* @__reserved: Must be 0
* @object_id: ID of the object if required
* @val64: Option value to set or value returned on get
*
* Change a simple option value. This multiplexor allows controlling options
* on objects. IOMMU_OPTION_OP_SET will load an option and IOMMU_OPTION_OP_GET
* will return the current value.
*/
struct iommu_option {
__u32 size;
__u32 option_id;
__u16 op;
__u16 __reserved;
__u32 object_id;
__aligned_u64 val64;
};
#define IOMMU_OPTION _IO(IOMMUFD_TYPE, IOMMUFD_CMD_OPTION)
/**
* enum iommufd_vfio_ioas_op - IOMMU_VFIO_IOAS_* ioctls
* @IOMMU_VFIO_IOAS_GET: Get the current compatibility IOAS
* @IOMMU_VFIO_IOAS_SET: Change the current compatibility IOAS
* @IOMMU_VFIO_IOAS_CLEAR: Disable VFIO compatibility
*/
enum iommufd_vfio_ioas_op {
IOMMU_VFIO_IOAS_GET = 0,
IOMMU_VFIO_IOAS_SET = 1,
IOMMU_VFIO_IOAS_CLEAR = 2,
};
/**
* struct iommu_vfio_ioas - ioctl(IOMMU_VFIO_IOAS)
* @size: sizeof(struct iommu_vfio_ioas)
* @ioas_id: For IOMMU_VFIO_IOAS_SET the input IOAS ID to set
* For IOMMU_VFIO_IOAS_GET will output the IOAS ID
* @op: One of enum iommufd_vfio_ioas_op
* @__reserved: Must be 0
*
* The VFIO compatibility support uses a single ioas because VFIO APIs do not
* support the ID field. Set or Get the IOAS that VFIO compatibility will use.
* When VFIO_GROUP_SET_CONTAINER is used on an iommufd it will get the
* compatibility ioas, either by taking what is already set, or auto creating
* one. From then on VFIO will continue to use that ioas and is not effected by
* this ioctl. SET or CLEAR does not destroy any auto-created IOAS.
*/
struct iommu_vfio_ioas {
__u32 size;
__u32 ioas_id;
__u16 op;
__u16 __reserved;
};
#define IOMMU_VFIO_IOAS _IO(IOMMUFD_TYPE, IOMMUFD_CMD_VFIO_IOAS)
/**
* struct iommu_hwpt_alloc - ioctl(IOMMU_HWPT_ALLOC)
* @size: sizeof(struct iommu_hwpt_alloc)
* @flags: Must be 0
* @dev_id: The device to allocate this HWPT for
* @pt_id: The IOAS to connect this HWPT to
* @out_hwpt_id: The ID of the new HWPT
* @__reserved: Must be 0
*
* Explicitly allocate a hardware page table object. This is the same object
* type that is returned by iommufd_device_attach() and represents the
* underlying iommu driver's iommu_domain kernel object.
*
* A HWPT will be created with the IOVA mappings from the given IOAS.
*/
struct iommu_hwpt_alloc {
__u32 size;
__u32 flags;
__u32 dev_id;
__u32 pt_id;
__u32 out_hwpt_id;
__u32 __reserved;
};
#define IOMMU_HWPT_ALLOC _IO(IOMMUFD_TYPE, IOMMUFD_CMD_HWPT_ALLOC)
/**
* struct iommu_hw_info_vtd - Intel VT-d hardware information
*
* @flags: Must be 0
* @__reserved: Must be 0
*
* @cap_reg: Value of Intel VT-d capability register defined in VT-d spec
* section 11.4.2 Capability Register.
* @ecap_reg: Value of Intel VT-d capability register defined in VT-d spec
* section 11.4.3 Extended Capability Register.
*
* User needs to understand the Intel VT-d specification to decode the
* register value.
*/
struct iommu_hw_info_vtd {
__u32 flags;
__u32 __reserved;
__aligned_u64 cap_reg;
__aligned_u64 ecap_reg;
};
/**
* enum iommu_hw_info_type - IOMMU Hardware Info Types
* @IOMMU_HW_INFO_TYPE_NONE: Used by the drivers that do not report hardware
* info
* @IOMMU_HW_INFO_TYPE_INTEL_VTD: Intel VT-d iommu info type
*/
enum iommu_hw_info_type {
IOMMU_HW_INFO_TYPE_NONE,
IOMMU_HW_INFO_TYPE_INTEL_VTD,
};
/**
* struct iommu_hw_info - ioctl(IOMMU_GET_HW_INFO)
* @size: sizeof(struct iommu_hw_info)
* @flags: Must be 0
* @dev_id: The device bound to the iommufd
* @data_len: Input the length of a user buffer in bytes. Output the length of
* data that kernel supports
* @data_uptr: User pointer to a user-space buffer used by the kernel to fill
* the iommu type specific hardware information data
* @out_data_type: Output the iommu hardware info type as defined in the enum
* iommu_hw_info_type.
* @__reserved: Must be 0
*
* Query an iommu type specific hardware information data from an iommu behind
* a given device that has been bound to iommufd. This hardware info data will
* be used to sync capabilities between the virtual iommu and the physical
* iommu, e.g. a nested translation setup needs to check the hardware info, so
* a guest stage-1 page table can be compatible with the physical iommu.
*
* To capture an iommu type specific hardware information data, @data_uptr and
* its length @data_len must be provided. Trailing bytes will be zeroed if the
* user buffer is larger than the data that kernel has. Otherwise, kernel only
* fills the buffer using the given length in @data_len. If the ioctl succeeds,
* @data_len will be updated to the length that kernel actually supports,
* @out_data_type will be filled to decode the data filled in the buffer
* pointed by @data_uptr. Input @data_len == zero is allowed.
*/
struct iommu_hw_info {
__u32 size;
__u32 flags;
__u32 dev_id;
__u32 data_len;
__aligned_u64 data_uptr;
__u32 out_data_type;
__u32 __reserved;
};
#define IOMMU_GET_HW_INFO _IO(IOMMUFD_TYPE, IOMMUFD_CMD_GET_HW_INFO)
#endif
Mr. DellatioNx196 GaLers xh3LL Backd00r 1.0, Coded By Mr. DellatioNx196 - Bogor BlackHat